Electric Central Heating Systems

The Ducasa Pilot Wire programmer provides total control of the Ducasa Multi-Zone Range which includes the Vitro Panel Heaters, Avant DGP Electric Radiators and white MCR Colorado Towel Rail from one centralised position. Not only convenient, the programmer helps keep running costs down by independently controlling different zones in the home.

Each zone can be programmed to switch on at different times so no need to heat the bedrooms during the day or the living areas during the night, unlike traditional central heating. Each heater can be switched between Comfort, Economy, Frost Protection or Off with mode changes possible every hour.

The number of rooms in each zones can be personalised to suit your living style, however most of our systems are installed with one zone for the living areas, one for the bedrooms, one for the hallway and one for the bathrooms. Suggested temperatures for each zone are 21°C for living areas, 18°C for bedrooms and hallways and 22°C for bathrooms however the choice is yours because the temperature of each heater can also be adjusted independently.

Programming couldn’t be easier using the large LCD screen and mode selection buttons; simply select the zone and press the required mode for each hour of the day – that’s it, but if you do have problems remember our aftersales staff are here to help.

Additional features include individual zone overide, total system overide and a holiday mode which switches the system to Frost Protection or Off for the duration of the holiday and then reverts to the previously set programmes.

- Program up to 4 zones independently
- Unlimited number of compatible heaters in each zone
- Comfort, Economy, Frost Protection and Off modes
- Single Zone or Full System Overide
- Holiday Mode
- Easy to Program
- Large LCD Screen

To order the Ducasa 4-Zone Programmer , simply select the number you wish to purchase and click Add to Basket.

Using the Ducasa Remote Programmer will help bring your heating system into the 21st century by providing a high degree of comfort in the home. The programmer makes it possible to meet the wide and varied demands of heating a home 24/7 for modern day living, with the added bonus of saving energy and money.

With your whole-house environment at your fingertips, the Ducasa Remote Programmer provides comfortable living together with reduced energy consumption.

The Ducasa infrared remote programmer is compatible with the following product ranges; Vitro, Avant DGP, Colorado towel radiators. 

- 24 hr / 7 day programmer
- Comfort, economy, frost protection and off modes
- Automatic, stand by, time adjust & programme functions
- Over ride and holiday functions
- Temperature adjustment and tamper proof functions
- 9 Factory set programmes for convenience
- 5 customisable programmes
- On screen programming and time display
- 3 AA batteries included
- Low battery warning
- Programs remain when battery is changed

To order the Ducasa Remote Programmer, simply select the number you wish to purchase and click Add to Basket.

Ducasa Easy Control

Programme your Inox designer heater with the simple to use Easy Control heating your environment when you want, to the temperatures you want.

This controller really is easy - no complicated digital menus, just movable pegs, time and two temperatures to set.

By moving the pegs with the tool provided you set two programmes choosing between comfort and economy modes for each hour of the day. One of the set programmes can then be chosen for each day of the week.

Final job is to set the required temperature for economy or comfort mode and transmit the setting to your Inox designer panel heater.

- Easy to use 'peg' programmer
- Compatible with the Ducasa Inox
- Adjustable economy and comfort temperatures
- 2 user set programmes
- Hourly mode changes
- Batteries included
- Room temperature displayed when on standby
- Discreet and simply to install

To order the Ducasa Easy Controller, simply select the number you wish to purchase and click Add to Basket.

Ducasa Digital Programmer

The optional Ducasa DT1 Digital Programmer is compatible with the Sunburst PRC20T panel heater - it's discreet and easy to install, simply plug into the back of the heater and fix in place with 1 small screw.

By using the Ducasa DT1 programmer the Sunburst can be timed to switch on or off up to 6 times a day providing warmth when you need it and saving money when you don't.

The DT1 programmer is purpose built for the Sunburst, far better looking than an unsightly plug in socket timer and incorporates lockable, tamperproof controls for additional peace of mind.

- 24 hour digital programmer
- Compatible with the Sunburst PRC20T
- Up to 6 mode changes a day
- Tamperproof keypad
- Discreet and simple to install

To order the Ducasa DT1 Programmer, simply select the number you wish to purchase and click Add to Basket.